MyoPlus Pro Bluetooth - 1 Channel Neuromuscular Biofeedback and Electrostimulation, with Colour Touchscreen and PC Software with Wireless Connectivity

NeuroTrac® MyoPlus Pro is the Classic Biofeedback / ETS / Stimulation device with a New and Improved touch-screen with full colour display. A proper tool for biofeedback training or as a diagnostic tool for improving rehabilitation techniques.

Features
- Includes NeuroTrac PC Software with Bluetooth connectivity! The unit sends up to 10 meters of wireless data to PC software
- New and Improved touch-screen with full colour display. The new user friendly interface makes it a self-explanatory unit with the interactive learning on the go, including electrode placement, running EMG graph as well as many other helpful tools
- EMG Templates function with choice of pre-installed graph templates or user designed on touchscreen custom graph shapes
- 4 EMG biofeedback games: Bunny, Plane, Rose (Work/Rest), Rose (Relaxation)
- Pre-set programmes for Incontinence treatment and neuro-muscular Rehabilitation
- Single channel EMG (Biofeedback) combined with 1 channel of NMES (stimulation)
- Single channel ETS (EMG triggered stimulation) with single channel stimulation
- Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme
- Multilingual LCD screen and voice prompts for Biofeedback
- Manual and Automatic threshold control
- EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation)
- Stand alone device or used in conjunction with established multilingual software
- For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current
- Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation
- Lock Function possibility of treatment settings for home or in-clinic use with automatic storage and averaging of statistics of all performed sessions
- Display of treatment statistics at the end of each session, like Work Average, Rest Average, Onset Average, Release Average, Peak Value, Work Average Deviation, Rest Average Deviation
- 4 x AAA batteries (no mains required)
- Inlcudes:
1 x carrying case
1 x rubber sleeve with inclined stand, small stylus and lanyard attachment option
1 x NeuroTrac PC Software wireless kit
4 x AAA batteries
2 x EMG cables
1 x reference cable
1 x pouch of 4 50x50mm adhesive electrodes
1 x operator's manual
1 x programs manual
1 x normal stylus pen

Programs
The unit has a range of different programs:
- 22 pre-set programs for pelvic floor
- 10 custom programs for pelvic floor
- 25 pre-set programs for neuromuscular rehabilitation
- 10 custom programs for neuromuscular rehabilitation 

EMG (Biofeedback) Specifications
- Single channel EMG
- EMG Range: 0.2 to 2000 μV RMS (continuous)
- Sensitivity: 0.1 μV RMS
- Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
- Selectable Bandpass filter - 3db Bandwidth,
    - a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% - Reading below 235 microvolts, 10 Hz +/-3 Hz to 370 Hz +/- 10% - Reading above 235 microvolts
  - b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
- Notch filter: 50 Hz (Canada 60Hz) - 33 dbs (0. 1% accuracy)
- Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
- Work / Rest periods: 2-99 seconds
- Number of Trials: 2-99

NMES, TENS and ETS (Neuromuscular Stimulation) Specifications
- Single channel Stimulator
- Amplitude: 0-90 mA into 500 Ohm load - actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
- Type: Constant current,
- Maximum output voltage 70 Volts +5 / -10 Volts
- Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
- Pulse width selection: 50-330 μs (10% accuracy)
- Pulse rate selection: 2-100 Hz (5% accuracy)
- Work / Rest periods: 2-99 seconds
- Time 1 - 99 minutes
- Ramp up time: 0.1 - 9.9 seconds
- Preset and user programmable treatment Programs
- Automatic output shut off with detection of open electrode above 10 mA (+/- 2mA)

Unit specifications
- Battery: 4 x 1.5V, AAA.  Low battery indication at 5.4 volts +/- 0.2 volts, automatic shut off when voltage drops below the low indication. The device goes off automatically when not in use (energy saving)
- Expected average battery set life [of standard 850 mAh, alkaline]: 14-18 hours in STIM, 28 hours in EMG mode
- Dimensions (LxWxD): 150x89x35 mm
- Weight: 0.14 kg (without batteries)

NeuroTrac PC Software
- Downloadable from the manufacturer's website as fully functional 15 days trial and unlocked with licence key included with each bluetooth-enabled NeuroTrac unit
- Each license key allows up to 5 activations for installing the softwares to different PCs or in the case re-installment of Windows or in the case of changing important hardware in the computer
- Fully encrypted patient database that is transferable without license limitations
- EMG/ETS curve on-screen display during treatment
- Template Training function where the therapist draws EMG pattern on-screen to be followed by patient during treatment
- Create Progress Report function for creating and printing comprehensive patient reports with overall statistics, graphs, important factors, therapist assesment and comments
- Home Compliance Download for downloading averaged statistics gathered during Lock Function operation